Call Us: 343-361-0463 | Subscribe to our Newsletter

How RE300 rare earth coagulant helps keep pH in balance, while also achieving ultra-low phosphorus limits.

DATE POSTED: August 21, 2019

We’re not suggesting that you can use RE300 rare earth coagulant to control pH. But it’s unique properties mean that it is far less likely to lower the pH of the wastewater system and require the use of pH adjustment with caustic soda or other chemicals. 

RE300 is a proven way to dramatically reduce phosphorus in treated effluent and achieve levels as low as 0.07 mg/L. This rare earth technology outperforms conventional coagulants because it binds more tightly to phosphorus and forms a denser, heavier floc that settles more rapidly. By switching to RE300, many treatment plants have avoided the need for costly equipment upgrades to meet stringent phosphorus limits.

RE300 is far less acidic than alternatives

RE300 has a median pH of 3.5, compared to ferric or alum coagulants that are typically in the pH range of 1.5 to 2.2. This means that these conventional coagulants can be up to 100 times more acidic than RE300. 

This dramatic difference in pH is compounded when we consider that the dose rate for ferric or alum coagulants is typically two to three times higher than that of RE300, which can dramatically impact the overall pH of the wastewater system. 

By replacing ferric or alum coagulants with RE300, which offers lower acidity and dose rate, operators can maintain desired pH levels in the plant processes with little to no pH adjustment — translating to significant cost savings for chemical consumption and process control. 

Less coagulant = less sludge

The low dose rate for RE300, along with its high affinity to phosphorus, also results in far less sludge production. Lower sludge volumes mean less pumping, dewatering, hauling and disposal, which contributes to lower costs and additional savings for each of these operations.

Learn more about RE300 rare earth coagulant for phosphorus reduction.

Contact us to arrange an assessment and pilot test of RE300 at your plant.

Back to Top


Bishop Water Technologies
220 Carswell St., Renfrew, Ontario, Canada K7V 2G4

Phone: 343-361-0463
Fax: 1-844-272-6102

Copyright © 2018 Bishop Water Technologies | All rights reserved

Site Administration & Hosting by TUBMAN Marketing Inc.